Simply remove the existing heat exchanger and replace it with the adaptor, using Banjo bolt DPO.COOL07 and existing O-rings, connect the auxiliary cooler hoses to the outlet pipes on the adaptor and refit the heater hoses to by-pass the original heat exchanger, job done.
Note: if your transmission was originally fitted with the thin 6 row cooler you can use your existing Banjo bolt.
コメント（3）
http://www.automaticchoice.com/tech_info.php
2012/9/7(金) 午前 8:18
Fitting:
Simply remove the existing heat exchanger and replace it with the adaptor, using Banjo bolt DPO.COOL07 and existing O-rings, connect the auxiliary cooler hoses to the outlet pipes on the adaptor and refit the heater hoses to by-pass the original heat exchanger, job done.
Note: if your transmission was originally fitted with the thin 6 row cooler you can use your existing Banjo bolt.
Part No.DPO.COOL06
2012/9/7(金) 午前 8:23
http://www.automaticchoice.com/new_parts.php
2012/9/7(金) 午前 8:23