1380 PISTON EACH - MINI & MINI COOPER
For the ultimate in engine performance, these pistons,
installed in a 1275cc block,
will blow your doors off! You can't beat cubic inches for performance, and the A-Series block can be bored far bigger than the factory ever imagined.
The stock bore is 70.6mm, the 1380 bore is 73.5mm.
This is .120" oversize and still leaves room in the block to go to 74mm (1400cc), but only if you offset bore prior to going to 73.5mm.
These 73.5mm pistons from Hepolite are great for street and mild racing.
73.mm bore size is 2.8973", Pin height is 1.4875. Top 2 rings are 1.5mm height (.0591"), oil ring is 4mm (.1575")
http://www.minimania.com/web/Item/20659%2Fstd%2Fea/invDetail.cfm
|
http://groups.yahoo.co.jp/group/ats-index/messages
2009/6/10(水) 午前 5:20
返信する
ナスタチューム書いたらここにきました。
2009/6/10(水) 午前 6:12[ - ]返信する
インジェクションミニ
www.geocities.jp/dmxbd452/injection.html - キャッシュ
燃圧はレギュレーターで調整され1，0～1，2㎏/c㎡有れば正常 単体でも1．5kg/c㎡位の低圧ポンプ 外車、国産車共に3．0kg/c㎡が多い、4．5～5．3kg/c㎡の高圧の物も有る。燃圧を正常に保つ為にフィルターは、早めに交換しましょう。詳しくはミニの問題点 ...
2012/3/14(水) 午前 8:28
返信する
トラックバックされた記事
PISTON-MINI & MINI COOPER:a forged Roller-Wave piston
To cap off our commitment to Mini performance, we've also designed a forged Roller-Wave piston that works hand-in-hand with the Mini's unique combustion chamber, netting even more detonation resistance, and of course many times the strength...
2009/6/10(水) 午前 4:09 [ SCAN-index ]
トラックバック先の記事
全932ページ