RAS, VDC off, Slip and ABS lights on 06 M35 - Nissan Forum ... forums.nicoclub.com/ras-vdc-off-slip-and-abs-lights-on-06-m35-t509317. html 22 Sep 2010 ... needs to be replaced to clear the 5 remaining error codes. The 5 remaining error codes are: C1185 C1137 C1107 C1929 C1?26 .... I am not sure what other service dept I could take the car to--I guess a nissan dealer? I am in ...
Postby G$$ » Tue Sep 21, 2010 5:56 pm Been muling around here since I bought an 06 M35 about a month ago. Unfortunately, my first post is not much of a value add, but any help/insight would be appreciated.
Car is driving fine but lights are on. Took to dealer and 7 error codes popped. They killed 2 of the codes with replacing the right front ABS sensor ($500 including labor) and are now telling me that the intelligent cruise control unit ($1,724+labor ) needs to be replaced to clear the 5 remaining error codes. The 5 remaining error codes are: C1185 C1137 C1107 C1929 C1?26
Anyone else had the same/similar issue? Thanks for the help
C1137 RAS CIRCUIT When RAS control unit is malfunction. • Harness or connector • ABS actuator and electric unit (control unit) • RAS control unit • CAN communication line
DTC CONFIRMATION PROCEDURE 1.DTC REPRODUCTION PROCEDURE 1. Turn the ignition switch ON. 2. Perform ABS actuator and electric unit (control unit) self-diagnosis. Is DTC “C1137” detected? YES >> Proceed to diagnosis procedure. Refer to BRC-73, "Diagnosis Procedure". NO >> INSPECTION END
Diagnosis Procedure INFOID:0000000003828920 1.CHECK RAS CONTROL UNIT Perform RAS control unit self-diagnosis. Is any item indicated on the self-diagnosis display? YES >> Repair or replace damaged parts. NO >> GO TO 2.
2.ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS 1. Erase ABS actuator and electric unit (control unit) self-diagnosis results. 2. Turn the ignition switch OFF. 3. Start the engine. Drive the vehicle for a while. 4. Make sure that RAS warning lamp turns OFF.
5. Stop the engine. Perform ABS actuator and electric unit (control unit) self-diagnosis. Is any item indicated on the self-diagnosis display? YES >> Replace ABS actuator and electric unit (control unit). NO >> Check ABS actuator and electric unit (control unit) pin terminals for damage or loose connection with harness connector. If any items and damaged, repair or replace damaged parts.
Special Repair Requirement INFOID:0000000003828911 1.ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION Always perform the neutral position adjustment for the steering angle sensor, when replacing the ABS actuator and electric unit (control unit). Refer to BRC-9, "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION : Description".
OFF SW VDC OFF switch signal status When VDC OFF switch ON (VDC OFF indicator lamp ON) On When VDC OFF switch OFF (VDC OFF indicator lamp OFF) Off FLUID LEV SW Brake fluid level switch signal status When brake fluid level switch ON On When brake fluid level switch OFF Off PARK BRAKE SW Parking brake switch signal status Parking brake switch is active On Parking brake switch is inactive Off
RASに関しては、どういうわけだが、初代HICASから始まりこの車で復活する直前の電動HICASまで、全部で４タイプ位あったと思うが、僕は、全てのタイプを乗っている。今や、4WSというのは何処のメーカも積極的にやっていない仕組みだ。初代HICASなどで使われていた油圧式のHICASは、左右Gが大きいと突発的に動いたりして、気難しさを感じるときがあった。電動になってからは、それは無くなり、安定した動作をしてくれていたが、動作速度が油圧式よりも遅くなったような気がしていた。今回のRASは電動式であり、実に豪快に動く（感じがする）
2016/7/20(水) 午前 5:27[ ogw*og*3 ]返信する
HICASと言っていた時代は、速度域に応じて、同位相と逆位相の2つの位相で後輪を動かすため、S字に走行すると逆位相が同位相になりそこから逆位相に持って行こうとして、破綻すると言うより、後輪のグリップが極端に下がり、暴れると言うことがあった。
RASと名称を変えて復活した今回の車では、VDCで抑えられているのか、幅の広いタイヤに変ったためにグリップが落ちにくいのか、それとも制御が精密になったのか分らないが、まだ暴れると言う現象には出逢っていない。過去の経験から言うとシチュエーション（特定の条件）で起きやすいので、引き続きいろいろためしてみようと思う。だが、静止状態からハンドルを来った状態で走り始めると何やら音がするので、"制御が精密になった"ということは無いような気がする。
2016/7/20(水) 午前 5:27[ ogw*og*3 ]返信する
RAS, VDC off, Slip and ABS lights on 06 M35 - Nissan Forum ...
forums.nicoclub.com/ras-vdc-off-slip-and-abs-lights-on-06-m35-t509317. html
22 Sep 2010 ... needs to be replaced to clear the 5 remaining error codes. The 5 remaining error codes are: C1185 C1137 C1107 C1929 C1?26 .... I am not sure what other service dept I could take the car to--I guess a nissan dealer? I am in ...
2016/7/20(水) 午前 5:28[ ogw*og*3 ]返信する
RAS, VDC off, Slip and ABS lights on 06 M35
Quote
Postby G$$ » Tue Sep 21, 2010 5:56 pm
Been muling around here since I bought an 06 M35 about a month ago. Unfortunately, my first post is not much of a value add, but any help/insight would be appreciated.
http://forums.nicoclub.com/ras-vdc-off-slip-and-abs-lights-on-06-m35-t509317.html
2016/7/20(水) 午前 5:32[ ogw*og*3 ]返信する
Car is driving fine but lights are on. Took to dealer and 7 error codes popped. They killed 2 of the codes with replacing the right front ABS sensor ($500 including labor) and are now telling me that the intelligent cruise control unit ($1,724+labor ) needs to be replaced to clear the 5 remaining error codes. The 5 remaining error codes are:
C1185
C1137
C1107
C1929
C1?26
Anyone else had the same/similar issue? Thanks for the help
2016/7/20(水) 午前 5:32[ ogw*og*3 ]返信する
C1137 RAS CIRCUIT
http://www.infiniti-club.org/manual/2010_FX35-50/BRC.pdf
2016/7/20(水) 午前 5:38[ ogw*og*3 ]返信する
C1137 RAS CIRCUIT When RAS control unit is malfunction.
• Harness or connector
• ABS actuator and electric unit
(control unit)
• RAS control unit
• CAN communication line
2016/7/21(木) 午前 5:40[ ogw*og*3 ]返信する
DTC CONFIRMATION PROCEDURE
1.DTC REPRODUCTION PROCEDURE
1. Turn the ignition switch ON.
2. Perform ABS actuator and electric unit (control unit) self-diagnosis.
Is DTC “C1137” detected?
YES >> Proceed to diagnosis procedure. Refer to BRC-73, "Diagnosis Procedure".
NO >> INSPECTION END
2016/7/21(木) 午前 5:42[ ogw*og*3 ]返信する
Diagnosis Procedure INFOID:0000000003828920
1.CHECK RAS CONTROL UNIT
Perform RAS control unit self-diagnosis.
Is any item indicated on the self-diagnosis display?
YES >> Repair or replace damaged parts.
NO >> GO TO 2.
2016/7/21(木) 午前 5:43[ ogw*og*3 ]返信する
2.ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS
1. Erase ABS actuator and electric unit (control unit) self-diagnosis results.
2. Turn the ignition switch OFF.
3. Start the engine. Drive the vehicle for a while.
4. Make sure that RAS warning lamp turns OFF.
2016/7/21(木) 午前 5:44[ ogw*og*3 ]返信する
5. Stop the engine. Perform ABS actuator and electric unit (control unit) self-diagnosis.
Is any item indicated on the self-diagnosis display?
YES >> Replace ABS actuator and electric unit (control unit).
NO >> Check ABS actuator and electric unit (control unit) pin terminals for damage or loose connection
with harness connector. If any items and damaged, repair or replace damaged parts.
2016/7/21(木) 午前 5:44[ ogw*og*3 ]返信する
Special Repair Requirement INFOID:0000000003828911
1.ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION
Always perform the neutral position adjustment for the steering angle sensor, when replacing the ABS actuator
and electric unit (control unit). Refer to BRC-9, "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL
POSITION : Description".
2016/7/21(木) 午前 5:45[ ogw*og*3 ]返信する
OFF SW VDC OFF switch signal status
When VDC OFF switch ON
(VDC OFF indicator lamp ON)
On
When VDC OFF switch OFF
(VDC OFF indicator lamp OFF)
Off
FLUID LEV SW Brake fluid level switch signal status
When brake fluid level switch ON On
When brake fluid level switch OFF Off
PARK BRAKE SW Parking brake switch signal status
Parking brake switch is active On
Parking brake switch is inactive Off
http://www.infiniti-club.org/manual/2010_FX35-50/BRC.pdf
2016/7/21(木) 午前 5:56[ ogw*og*3 ]返信する
How To... Change Upper Front Wishbone on an Alfa 147/156/GT
A guide to replacing the front upper wishbones on a GT, 156 and 147.
Lift up car and make sure it is safe and then remove road wheel
2. Remove shock absorber lower mounting bolt into lower wishbone.
http://www.alfaworkshop.co.uk/alfa_wishbone_replacement.shtml
2016/7/21(木) 午前 6:04[ ogw*og*3 ]返信する
転がり抵抗係数表 道路条件 μr
乾いた砂地 約0.25
砂または石灰質の道 約0.17
新しく砂利を敷いた道 約0.13
石の多い凸凹道 約0.08
手入れのよい小砂利道 約0.03
アスファルトまたはコンクリート道 約0.015
http://dskjal.com/programming/car-physics-for-simulator.html
2016/7/31(日) 午前 5:56[ ogw*og*3 ]返信する
トラックバック先の記事