BMW:E39:DTC:P1632:電制スロットル＞the SLM light coming on the dash and no throttle response.
E39maniacsさん DTC:P1632等で T/Bさせて頂きます。
BMW:E39:DTC:P1632:電制スロットル＞the SLM light coming on the dash and no throttle response.
類似例ありそうなのでサーチしておきたい。
TAS...
http://www.aboutautomobile.com/DTC/P1632
BMW: Throttle Valve Adaptation; Adaptation Conditions Not Met
Definition of Diagnostic Trouble Code P1632
This Definition of P1632 is Applied to the Following Manufacturers Audi: Acceleration Pedal Position Sensor 1 Power Supply Malfunction
BMW: Throttle Valve Adaptation; Adaptation Conditions Not Met
Buick: Theft Deterrent Fuel Disable Signal Received
Cadillac: Theft Deterrent Fuel Disable Signal Received
Chevrolet: Theft Deterrent Fuel Disable Signal Received
Chrysler: TCM Internal - Test Internal Watchdog Performance
Dodge: TCM Internal - Test Internal Watchdog Performance
Ford: Smart Alternator Faults Sensor / Circuit
GMC: Theft Deterrent Fuel Disable Signal Received
Isuzu: Theft Deterrent Fuel Disable Signal Received
Jaguar: CAN message implausible
Jeep: TCM Internal - Test Internal Watchdog Performance
Kia: Battery Voltage Detection Circuit For Alternator Regulator (1.8L)
Land Rover: Electronic throttle monitoring/self-test - limp home position not adapted.Last occurrence - plausibility
Lincoln: Smart Alternator Faults Sensor / Circuit
Mazda: Battery Voltage Monitor Circuit
Mercedes: ECM
Mercury: Smart Alternator Faults Sensor / Circuit
Oldsmobile: Theft Deterrent Fuel Disable Signal Received
Pontiac: Theft Deterrent Fuel Disable Signal Received
Saab: Internal Control Module Malfunction
Saturn: Theft Deterrent Fuel Disable Signal Received
Volkswagen: Acceleration Pedal Position Sensor 1 Power Supply Malfunction
Volvo: RTC
http://www.bimmerfest.com/forums/showthread.php?t=188519
P1632 code any ideas?
Hi,
Got in the car today, started it ....
it started shaking.....shut it off.
try again.....same thing
try again......runs fine.
Check engine light -> auto zone
pulled code P1632
Autozone printout said Smart alternator faults/circuit malfunction
Bently manual says Throttle valve adaptation conditions not met.
Very discriptive
2002 Z3 3.0 coupe 38k miles.
02-09-2007, 05:00 PM
oxford
Officially Welcomed to the 'Fest
Location: USA Join Date: Jan 2005
Posts: 143
Mein auto: '01 Z3, '03 330i
View My Garage
Don't trust the AutoZone printout for DTCs starting with P1 or higher. Each manufacturer assigns their own meaning to these codes. The description AutoZone gave you may be for a Chevy. (They are OK for DTCs starting with P0. Those have the same meaning regardless of manufacturer.)
Your car has an electrically operated throttle valve. During start-up, the DME operates the valve to assure it will respond correctly to the accelerator pedal. I believe that DTC means that the throttle valve is not operating the way the DME "thinks" it should. It may be sticking, or have a failing stepper motor, or a loose connection on the motor or position sensor (not sure if it actually has one of those).
That's what I think. A throttle body ain't cheap, so please verify my diagnosis before spending any money throwing parts at the problem.
02-09-2007, 06:49 PM
schernov
Registered User
Location: chicago Join Date: Jul 2006
Posts: 72
Mein auto: 2002 Z3 Coupe
View My Garage
well, 30 min later when i started the car, the light went away...
I will check the things you mentioned....
thanks
http://www.dashdyno.fr/tech/Codes/BMW.html
http://www.justanswer.com/questions/1ap14-2001-bmw-525i-stalled-off-lights
Question
I have a 2001 BMW 525i that stalled off the lights with the SLM light coming on the dash and no throttle response.
I checked with OBD-II code reader and have P1638, P1639 and
P1632 codes being displated.
Is the throttle body housing need replacing, or what am I to check
Accepted Answer
Hello,
Sound like your electronic throttlebody has gone bad.
It needs to be replaced, codes erased and adaptations reset.
This can only be done at a dealer or a BMW specialist.
Before you do that just make sure that all the fuses in the ebox fuse carrier are good.
If F1, check for shorted cooling thermostat (cooling map circuit).
I don't think this is your problem since you don't have any codes for map cooling circuit, but I have seen this happen with this symptom and it is worth checking before you start replacing a part.
Good luck
If this information was helpful please hit accept. Thanks, Nick
コメント（2）
そのサイズに違いが出るワケ
http://blogs.yahoo.co.jp/tx_b19_89_ta/25930306.html
2009/6/30(火) 午前 8:06
返信する
E39 TRANS FAILSAFE PROGとインヒビタスイッチ修理 － NOTAさんより
平成15年式・走行62,000キロの530iです。
昨年の冬から始動直後に"TRANS FAILSAFE PROG"が表示され、時々パーキングの位置にてエンジンスタートするとエラーが出ました。調べてみますと、エラーの原因には、オルターネタの電圧降下やミッションのトラブル等、いろいろあるようです。１つの原因として、インヒビタスイッチ（BMWで言うシフトの「ポジションセンサ」）が原因ではないかと推測しました。しかし、トランスミッションとTRANS FAILSAFE PROGに関する記事が少なく試行錯誤しておりました。
４年前のサービスフリーウェイ保証切れ寸前に故障したオルタネータは既に交換してあるし、バッテリーも規定電圧があります。このエラーが出ると、セレクターポジションランプが消えてしまい、３速発進になってしまいます。
http://dd.jpn.org/BMW_HP/20100905/index.shtml
2011/2/6(日) 午前 7:50
返信する
トラックバック先の記事