BZ:SAM: ( ボランティア活動 ) - 車QF - Yahoo!ブログ
BZ:SAM:
http://www.mercedesforum.com/forum/showthread.php?t=23589
Info on SAM module I was wondering if anyone knew some specific information i was looking to get on the SAM module on the c-class.
I wanted to know if when you replace the module, do you have any functions that work prior to having it re-flashed by the dealer.
The car does nothing.
When you put the key to the on position the only thing it does is it turns the cooling fan for the radiator on high, and the dash lights come one.
Thats about it.
any information would be greatly appreciated.
Thankyou
コメント(26)
SAM means Service Access Module.
On Mercedes-Benz, the signal has to be sent to the rear SAM since it is the closest unit in the Controller Are Network. .... If you get an error message that no communication with the SAM module exists, it means that the SAM is defective or it is ...
W203
ガソリンメーターが動かなくなるという症状でリヤSAMを交換しました!!
W211もそうですが、ガソリンメーターが動かなくなったら、まずリヤSAMを疑うべきですね!!
http://ameblo.jp/ptmercedes/entry-10068628517.html
2011/1/30(日) 午前 2:57返信する
Mercedes Benz SAM (Signal Acquisition/Activation Module) Units on W203 C class Mercedes and W211 E class. Front and rear units causing lights failing/staying on and door windows/locks not working.
BBA can now rebuild these with our usual 2 year unlimited mileage warranty.
http://bba-reman.com/content.aspx?content=Mercedes_Benz_SAM_Units
2011/1/30(日) 午前 2:59返信する
W203 Cクラス リアSAM (ヒューズBOX)
W203はコンピューターが約20個付いています。このヒューズBOX自体もモジュール、コンピューターです。壊れると書ききれない位、不具合が起こります。
http://www.ata2003.com/column/images/1170335485_328x246.jpg
2011/1/30(日) 午前 3:26返信する
RE: Info on SAM module
the SAM control unit controls many of the different features incuding wipers, headlamps, turn signals, fog lamps, horns, etc. it also monitors and sends infromation about a/c refrierant pressures and temp., coolant level, washer level, etc. it could be the fault your having but it could possilbly be the engine control unit.
http://www.mercedesforum.com/forum/showthread.php?t=23589
2011/1/30(日) 午前 7:18返信する
there is some coding required in the sam, but i do not think it is required for engine start-up.
2011/1/30(日) 午前 7:19返信する
there are usually many "SAM" modules in a MB....
what year is your car, and why do you think its a SAM ????
http://groups.yahoo.co.jp/group/ats-index/message/3658
2011/1/30(日) 午前 7:20返信する
kara.elias Join Date: Sep 2007
Posts: 4
RE: Info on SAM module
i have gotten pages and pages of wiring diagrams, and while going over it, all the functions that do not work lead me right to the SAM module. All wiring and everything going to the column is fine. Fuse box is powered up, no burnt fuses. I bought a $400 SAM module and put it in the car.
2011/1/30(日) 午前 7:21返信する
When i did that the car would not start when i turn the key to the start position, but the dash lights all come on. Another thing it is doing with the new module is that it is powering up the cooling fan for the motor to the highest level. I feels like a shop fan at the front of this car when this thing is blowing. ( It sort of amazed me how much air this thing pushes).
2011/1/30(日) 午前 7:22返信する
The other thing i never mentioned on my first post is that this car also had a blown compressor, and i have come to find out that i have to reset the computer to get the AC to work again with the new compressor. Also the ESP is disabled
2011/1/30(日) 午前 7:23返信する
Now my question is: When installing the new SAM module, in order for the functions that it controls to work, does it have to be flashed for the car, or not. Like i said, i put the module in and nothing worked. I dont want to have to pay a couple hundred dollars at the dealer to flash this module if its not gonna fix my problem.
And thankyou for the posts MasterBenzTech, and mbt36
2011/1/30(日) 午前 7:24返信する
mrluk1 Join Date: Jul 2006
Location:
Posts: 7
RE: Info on SAM module
So what was wrong with your car? How did you go about repairing it?
Please share.
2011/1/30(日) 午前 7:25返信する
MasterBenzTech
Member Join Date: May 2007
Location: parker, CO
Posts: 82
RE: Info on SAM module
there is differnet coding in the sams for different cars, if you still have your old sam,compare th fuselay out withthe new sam, theremight be missing a fuse which would cause the car not to start
c230, c240,
2011/1/30(日) 午前 7:26返信する
Mercedes Benz 169 - 245 Front SAM Control Unit
Location of Front SAM Control
SAM control unit (N10)
Front passenger-side SAM control unit
Location
The SAM control unit (N10) in combination with the relay block in model 169.0/3 and model 245.2 is located on the control unit retaining plate in the front passenger footwell below the instrument panel.
Note
The relay block can be separated from the control unit.
http://www.micro-tronik.com/mercedes_benz_169-245_front_passenger_sam_193.html
2011/1/30(日) 午前 7:34返信する
Control
· Exterior lights including turn signal functions Model 169.0/3
· Exterior lights including turn signal functions Model 245.2
· Interior lights (IBL) Model 169.0/3 Model 245.2
· Wiper system (WSA) Model 169.0/3 Model 245.2
· Fanfare horns Model 169.0/3 Model 245.2
· Heated rear window (HHS) Model 169.0/3 Model 245.2
· Headlamp cleaning system (HCS [SRA])Model 169.0/3 Model 245.2
· Central locking (CL [ZV]) Model 169.0/3 Model 245.2
2011/1/30(日) 午前 7:35返信する
Switching of consumers
• Left front lamp unit (complete)
• Right front lamp unit (complete)
• Left/right front fog lamp (with code U37)
• Left/right side marker (in model 245 I and M only)
• Left tail lamp and rear fog lamp
• Left stop lamp (with code U58)
• Left backup lamp (with code 426)
• Left turn signal lamp
2011/1/30(日) 午前 7:37返信する
• Right tail lamp and rear fog lamp
• Right stop lamp (with code U58)
• Right backup lamp (with code 426)
• Right turn signal lamp
• Rear-end door tail lamps (in model 245)
• License plate illumination
2011/1/30(日) 午前 7:38返信する
• Center high-mounted stop lamp (with code U58)
• Rear-end door lamp (standard in model 245.2, or in model 169.0/3 with code 954 or 955)
• Load compartment lamp
• Front and rear dome lamps (without code U58, or 249, or 345, or 359, or 551, or 876, or 882)
• Footwell lamps (with code 876)
2011/1/30(日) 午前 7:39返信する
• Headlamp cleaning system washer pump (with code 614 or 615)
• Washer nozzle heater and washer nozzle hose heater (with code 875)
• Washer pump
• Central locking, fuel filler flap
• Central locking, rear-end door
• Central locking, left/right rear doors (without code 584)
http://www.micro-tronik.com/mercedes_benz_169-245_front_passenger_sam_193.html
2011/1/30(日) 午前 7:39返信する
Scanning of switches, pickups and sensors
• Rotary light switch
• Stop lamp switch (with code 426, or U58)
http://www.micro-tronik.com/mercedes_benz_169-245_front_passenger_sam_193.html
2011/1/30(日) 午前 7:41返信する
• Backup lamp switch with manual transmission
• Headlamp cleaning system switch (with code 614, or 615)
• Coolant level indicator sensor
• Windshield washer fluid level indicator sensor (with code 614, or 615)
• Left/right rear door contact switch (without code 584)
• Rear-end door lock
• CL [ZV] radio receiver (via interface)
2011/1/30(日) 午前 7:41返信する
Switching the following relays
• Wiper on/off relay
• Wiper stage 1/stage 2 relay
• Fanfare horn relay
• Rear wiper relay (in rear wiper motor)
• Heated rear window relay
• Relays 1 and 2
• Circuit 87F relay
• Circuit 15R relay
• Circuit 15R 30g relay
2011/1/30(日) 午前 7:42返信する
Voltage supply for the following control units
• Circuit 30: CL [ZV] radio receiver (plug 1)
CAN connections
• CAN link between SAM control unit and CAN-B voltage distributor (plug 1)
CAN signals
The SAM control unit (N10) is a device on the CAN-B in the overall network
2011/1/30(日) 午前 7:44返信する
Block Diagram
· 1 Panoramic lamella sliding roof OPEN/CLOSED
· 7 Rain detected
· 8 Darkness detected
· 10 Reverse gear engaged or interior lights switched on
· 13 Rear dome lamp ON/OFF
· 17 Power supply to rain/light sensor
· 21 Power supply to rear reading lamps
· 26 Power supply to inside rearview mirror unit
2011/1/30(日) 午前 7:45返信する
· A67 Inside rearview mirror unit
· B38/2 Rain/light sensor (code U58)
· E11/1 Left rear reading lamp (code 876)
· E11/2 Right rear reading lamp (code 876
· E15/3 Rear dome lamp
· M12/2 Roof motor (code 417)
· N70 Overhead control panel control unit
· CAN-B Controller Area Network bus class B (interior compartment)
2011/1/30(日) 午前 7:46返信する
AutoHex (Auto Diagnostic scanner) is one of the best Professional scan tools to for Mercedes Benz; Autohex Scanner can test Mercedes Benz Systems effectively and easily, with many powerful features to help you in diagnosing and testing. For more information:
Mercedes Benz Scan Tool
http://www.micro-tronik.com/mercedes_benz_diagnostic_software_13.html
2011/1/30(日) 午前 7:47返信する
メルセデス203 エンジン始動不良。
リヤSAM内部故障
http://blogs.yahoo.co.jp/siosai70kazu/29568343.html
2011/8/23(火) 午前 7:50返信する