BZ:DTC:P205A cylinder 12 misfire,CAT damageed (P0312):P206D:P0730:P2502:P220A:ENG:

BZ:DTC:P205A cylinder 12 misfire,CAT damageed (P0312):P206D:P0730:P2502:P220A:ENG:

[53]

イメージ 1


イメージ 1

BZ:DTC:P205A cylinder 12 misfire,CAT damageed (P0312):P206D:P0730:P2502:P220A:

http://www.carhelp.info/forums/showthread.php?t=57192

P205A-008 Fault is stored in component Transmission control (P0730), 
P205A-032 Fault is stored in component Transmission control (P0740), 
P205A-064 Fault is stored in component Transmission control (P0730).


http://mbworld.org/forums/sl55-amg-sl63-amg-sl65-amg-r230/287744-misfire-problem.html
P2050 Misfiring,damages TWC P0300Lamp&Stored
P2057 Misfiring of cylinder 7,damages TWC P0307Lamp&Stored&Current
P2058 Misfiring of cylinder 11,damages TWC P0311Lamp&Stored&Current
P2059 Misfiring of cylinder 9,damages TWC P0309Lamp&Stored&Current
P205A Misfiring of cylinder 12,damages TWC P0312Lamp&Stored&Current
P205B Misfiring of cylinder 8,damages TWC P0308Lamp&Stored&Current
P205C Misfiring of cylinder 10,damages TWC P0310Lamp&Stored&Current


P2204 External quantity control by ETC CAN reception timeout
P2204 External quantity control by ETC ENGINE STOP
P2204 External quantity control by ETC Not all CAN messages have been received.
P2204 External quantity control by ETC Read fault memory of control unit N15/3 (ETC control module).
P2204 External quantity control by ETC Read fault memory of control unit Transmission control.
P2204 External quantity control by ETC Request from control module N15/3 (ETC control module) is implausible.
P2204 External quantity control by ETC The CAN message is implausible.
P2204 External quantity control by ETC Torque request from control module N15/3 (ETC control module) is faulty.
P2206 No signal from output speed sensor
P2207 The value of component Y3/6n3 (speed sensor 3) is implausible.
P220A The speed comparison of Y3/6n2 or Y3/6n3 is implausible.
P220B The speed of Y3/6n2 or Y3/6n3 is too high.
P2210 Selector lever coding is invalid.
P2211 The selector lever is in an intermediate position.
P2212 The selector lever position is implausible.
P2220 Component Y3/6s1(Starter lockout contact) or component Y3/6b1 (ATF temperature sensor) is faulty or both.
P2221 The signal of component Y3/6b1 (ATF temperature sensor) and (or) Y3/6s1 (Starter lockout contact) is implausible.
P2222 The signal of component Y3/6b1 (ATF temperature sensor) and (or) Y3/6s1 (Starter lockout contact) is implausible.
P2300 CAN communication is faulty.



P2500 The transmission has an impermissible transmission ratio.
P2501 Engine overevving has occurred.
P2502 The gear is implausible or the transmission is slipping.
P2503 The gear comparison is negative or the target gear is not reached.
P2510 The torque converter lock-up clutch causes impermissible closing.
P2511 Engaging of torque converter lockup clutch not permitted.
P2511 The torque converter lock-up clutch has excessive power consumption.
P2512 Actuation of torque converter lockup clutch is not possible
P2520 The feedback through the transmission protection is not maintained.
P2600 The voltage supply of circuit 87 has undervoltage.
P2601 The voltage supply of circuit 87 has overvoltage.
P2602 The voltage supply of the valves is faulty.
P2603 The voltage supply of the speed sensors is faulty.

P1850 Transmission rpm sensor Y3/7n1
I HAVE a170 CDI I CAN NOT DRIVE NOW WHEN I TRY TO DRIVE IT GOES 5MPH
WHEN I GO IN REVERSE NO PROBLEM I HAVE THIS CODE P1850 PWM VALVE 1-4 Y3/7Y1 FAULTY.


P1850 Transmission rpm sensor Y3/7n1 

PLEASE ADO ANY BODY ADVICE ME WHAT TO DO.
THANK YOU

 

 

 

f:id:TAS-net:20190903104124p:plain

 

 

 

コメント(14)

    

顔アイコン

P205A cylinder 12 misfire,CAT damageed (P0312)
P205B cylinder 8 misfire,CAT damageed (P0308)
P205C cylinder 10 misfire,CAT damageed (P0310)
P205E Component N15/3 (ETC control module) memory is fault.(P0702)
P205E fault stored in component N15/3 (EGS controller).(P0702)
P205F Component N15/3 (ETC control module) memory is fault.(P0753)
P205F fault stored in component N15/3 (EGS controller).(P0753)

2012/3/5(月) 午前 11:25ogw*og*2返信する

    

顔アイコン

P2060 Component N15/3 (ETC control module) memory is fault.(P0758)
P2060 fault stored in component N15/3 (EGS controller).(P0758)

http://www.benzworld.org/forums/general-mercedes-benz/1429876-mercedes-benz-diagnostic-trouble-codes-dtc-2.html

2012/3/5(月) 午前 11:25ogw*og*2返信する

    

顔アイコン

P2061 Component N15/3 (ETC control module) memory is fault.(P0763)
P2061 fault stored in component N15/3 (EGS controller).(P0763)
P2062 Component N15/3 (ETC control module) memory is fault.(P0743)
P2062 fault stored in component N15/3 (EGS controller).(P0743)

2012/3/5(月) 午前 11:26ogw*og*2返信する

    

顔アイコン

P2063 Component N15/3 (ETC control module) memory is fault.(P0748)
P2063 fault stored in component N15/3 (EGS controller).(P0748)
P2064 Component N15/3 (ETC control module) memory is fault.(P0748)
P2064 fault stored in component N15/3 (EGS controller).(P0748)
P2065 Component N15/3 (ETC control module) memory is fault.(P0702)
P2065 fault stored in component N15/3 (EGS controller).(P0702)

2012/3/5(月) 午前 11:27ogw*og*2返信する

    

顔アイコン

P2066 Component N15/3 (ETC control module) memory is fault.(P0715)
P2066 fault stored in component N15/3 (EGS controller).(P0715)
P2067 Component N15/3 (ETC control module) memory is fault.(P0705)
P2067 fault stored in component N15/3 (EGS controller).(P0705)
P2068 Component N15/3 (ETC control module) memory is fault.(P0720)
P2068 fault stored in component N15/3 (EGS controller).(P0720)

2012/3/5(月) 午前 11:27ogw*og*2返信する

    

顔アイコン

P2069 Component N15/3 (ETC control module) memory is fault.(P0700)
P2069 fault stored in component N15/3 (EGS controller).(P0700)
P206A Component N15/3 (ETC control module) memory is fault.(P0700)
P206A fault stored in component N15/3 (EGS controller).(P0700)

2012/3/5(月) 午前 11:28ogw*og*2返信する

    

顔アイコン

P206B Component N15/3 (ETC control module) memory is fault.(P0740)
P206B fault stored in component N15/3 (EGS controller).(P0740)
P206D Component N15/3 (ETC control module) memory is fault.(P0730)
P206D fault stored in component N15/3 (EGS controller).(P0730)

2012/3/5(月) 午前 11:29ogw*og*2返信する

    

顔アイコン

P206E Control module ME-SFI 2.8 is incorrectly coded (coded to MT,vehicle has AT)
P206E ME 2.7 controller incorrect coded (according to AT code,car has MT)
P206F Control module ME-SFI 2.8 is incorrectly coded or there is fault in the CAN communication with control module N15/3 (ETC control module)
P206F ME 2.7 controller incorrectly coded or communication error with N15/3 (EGS controller) controller BUS

2012/3/5(月) 午前 11:29ogw*og*2返信する

    

顔アイコン

P2070 as component N15/3 (EGS controller) voltage is too low,transmission variables can not be checked
P2070 Transmission version cannot be checked because of undervoltage at component N15/3 (ETC control module)
P2071 Start enable of DAS not sent
P2072 B4/3 (fuel tank pressure sensor),signal error (P0450)
P2072 B4/3 (Fuel tank pressure sensor),Signal implausible (P0450)

2012/3/5(月) 午前 11:30ogw*og*2返信する

    

顔アイコン

P205A-008 Fault is stored in component Transmission control (P0730), 
P205A-032 Fault is stored in component Transmission control (P0740), 
P205A-064 Fault is stored in component Transmission control (P0730). 

http://www.carhelp.info/forums/showthread.php?t=57192

2012/3/5(月) 午前 11:33ogw*og*2返信する

    

顔アイコン

A/T不調で入庫のW203・C200コンプレッサーです。
http://blog.jinguji.com/article/199753368.html

2012/3/5(月) 午前 11:56ogw*og*2返信する

    

顔アイコン

i-SCAN2
Fault 1/1 ID:205A
P205A [ Current / History ]

(イベント)故障は構成部品 トランスミッション・コントロールにメモリされています。
[P0715]/
[P0705]/
[P0720]/
[P0730]/
[P0836]/
[P0740]/
[P0730]

2012/3/5(月) 午後 0:17ogw*og*2返信する

    

顔アイコン

i-SCAN2
Fault 1/2 ID:2502
P2502 [ History ]
ギヤが妥当でないか、またはトランスミッションに滑りがあります。

2012/3/5(月) 午後 0:30ogw*og*2返信する

    

顔アイコン

i-SCAN2
Fault 2/2 ID:220A
P220A [ History ]

Y3/6n3 と Y3/6n2 とのスピード比較が妥当ではありません

2012/3/5(月) 午後 0:37ogw*og*2返信する

 

 

トラックバック先の記事