B1000 HRA Headlamp range adjustment: Supply voltage of the control unit is too low (undervoltage) B1004 LCP Lower Control Panel: Control unit does not match vehicle type
B1016 EIS No enable from control module EWM (Electronic Selector Lever Module) B1021 CAN fault N10-1 or A37 B1056 Automatic Air Conditioning: Problem in CAN communication with control unit DCM-RL B1132 Alarm activated via S62/7 glovebox switch B1153 Component B48 (Front passenger seat occupied and child recognition) has only detected one transponder (could also be memory card on front passenger seat)
B1201 Electric seat adjustment front left: Hall sensor front height M27m3 B1213 If seat memory installed: ext left rearview mirror voltage faulty B1214 If seat memory installed: ext right rearview mirror voltage faulty B1226 In-car temperature sensor (B10/4) B1227 Outside temperature indicator temp sensor (014) B1128 Heater core temperature (B10/1) B1229 Heater core temperature (B10/1) B1230 Evaporator temperature sensor (B10/6)
B1235 Emissions sensor (B31) B1241 Refrigerant Fill B1246 PTS Parktronic: A42b1 (left outer sensor, front bumper) The plug connection has poor contact or is loose, or the sensor or cable is faulty B1310 Left/Window airbag sensor is defective
B1315 Problem in Front passenger child seat recognition (could also be memory card on front passenger seat) B1416 Coolant circulation pump (M13) B1417 Duovalve (Y21y1), left B1418 Duovalve (Y21y2), right B1419 Electromagnetic clutch (A9k1) B1420 Idle speed increase
B1470 Fuel level sensor has on open B1476 Airbag malfunction indicator and warning lamp is defective B1481 HRA: Part E2m1 (Right headlamp range adjustment motor) has short to ground B1489 HRA: Part E2m1 (Right headlamp range adjustment motor) has open or short to positive B1492 HRA: Part E1m1 (Left headlamp range adjustement motor) has short to positive B1617 Part E19/1 (Left license plate lamp) is defective
B1618 Part E19/2 (Right license plate lamp) is defective B1628 Part E2e5 (Turn signal lamp) in module E2 (Right front headlamp unit) is defective. B1703 Intermittant No Start in AAM Immobiliser Module
B1709 Component H3 alarm siren - not fitted or not coded B1711 Alarm activated via hood switch S62 B1725 Alarm activated via ATA towing sensor in PSE) B1729 PSE Pneumatic system doorlock Control Module A37 B1736 Navigation system's CD Player: Check General CD, Check CD data block, Flimsy CD data B1768 Faulty open data flap limit switch (0025) Front flap
B1773 HRA: Zero position programming has not yet been carried out or is not possible B1795 Fault in CAN communication with EIS control module B1850 Electric seat adjustment front right: CAN communication interrupted with DCM B1858 Two-way radio signal. The progammed code is ok, but the programmable code is not synchronised. B1863 Belt pretensioner driver's side resistance too high (stored in airbag ECU) B1864 Belt pretensioner passenger's side resistance too high
B1867 Ignition circuit with component R12/9 (left front side airbag ignition squib) has < Ohm
B1869 left rear side airbag ignition squib has < Ohms B1871 right front side airbag ignition squib has < Ohms B1873 right rear side airbag ignition squib has < Ohms
Side Airbag squib connector broken - can't reset SRS light ... www.bimmerfest.com/.../showthread.php... - キャッシュ - このページを訳す 23 Feb 2011 – Do-It-Yourself H.Q.. Share your DIY projects or ask questions about how to fix something on your own. Help fellow Bimmerfest members improve your wrench turning skills! All BMWDIY tips, tales, and projects discussed ...
PDF] SRS AIRBAG www.turbosupras.com/pdfs/.../RS.pdf - このページを訳す ファイルタイプ: PDF/AdobeAcrobat - クイック ビュー The inflater and bag of the SRS are stored in the front passen- ger airbag assembly and cannot be disassembled. The inflater contains a squib, igniter charge and gas generant, etc., and in- flates the bag when instructed by the airbag sensor ...
96 E300 Drivers seat belt squib SRS light - MBWorld.org Forums mbworld.org/.../373114-96-e300-drivers... - キャッシュ - このページを訳す 投稿 2 件 - 2 人の編集者 - 2010年10月27日 I was rear ended and none of the airbags deployed. However I have my SRS light on. An Indy checked the code and said it was the drivers seat belt.
mercedes ml 320 with SRS light on Squib R12/10 and they tell ... www.justanswer.com/.../39bm1-mercede... - キャッシュ - このページを訳す hello was there some recent repairs made to right front door lately, they are telling you that the right side door air bag it self is bad, or is the connector is the door bad?? is this a MB dealer that is telling you this?? some after market scan tools ...
SRS Airbags - Ascunce Enterprises airbagcenter.com/airbag_t... - アメリカ合衆国 - キャッシュ - このページを訳す Learn to speak and understand the terms and terminogy of srs airbag replacement parts. ... SRS stands for supplemental restraint system. Airbags are ... The squib is the component within the air bag inflator that begins the deployment process.
SRS Light “ON” – DTC BO111BO116 Open Side Squib Circuit ... www.ownerservicemanual.com/300-srs-l... - キャッシュ - このページを訳す There are many information such as side airbag, harness, seatback lock assembly, armrest, seat side, light, and airbag assembly are described inside this …
Code No.B1401: Driver's Air Bag Module (1st Squib) System Fault 2 ... grandis.2de.ru/.../M152401590021500E... - キャッシュ - このページを訳す Open circuit in the driver's air bag module (squib) or harness. Open circuit in the clock spring. Malfunction of connector contact. However, if no diagnosis code reset, the SRS warning lamp will be switched off (diagnosis code will be retained) .
PDF] DTC B1801 OPEN IN D SQUIB CIRCUIT www.hybrids.ru/priusnhw20/rm/.../m_05_1244.pd... - このページを訳す ファイルタイプ: PDF/AdobeAcrobat The D squib circuit consists of the airbag ECU assy, the spiral cable sub-assy and the horn button assy. The circuit instructs the SRS to deploy when deployment conditions are met. DTC B1801 is recorded when an open circuit is detected in ...
B1000 HRA Headlamp range adjustment: Supply voltage of the control unit is too low (undervoltage)
B1004 LCP Lower Control Panel: Control unit does not match vehicle type
http://www.benzworld.org/forums/w208-clk-class/1474777-we-need-permanent-sticky-error-codes.html
2012/3/4(日) 午前 11:51
返信する
B1016 EIS No enable from control module EWM (Electronic Selector Lever Module)
B1021 CAN fault N10-1 or A37
B1056 Automatic Air Conditioning: Problem in CAN communication with control unit DCM-RL
B1132 Alarm activated via S62/7 glovebox switch
B1153 Component B48 (Front passenger seat occupied and child recognition) has only detected one transponder (could also be memory card on front passenger seat)
2012/3/4(日) 午前 11:52
返信する
B1201 Electric seat adjustment front left: Hall sensor front height M27m3
B1213 If seat memory installed: ext left rearview mirror voltage faulty
B1214 If seat memory installed: ext right rearview mirror voltage faulty
B1226 In-car temperature sensor (B10/4)
B1227 Outside temperature indicator temp sensor (014)
B1128 Heater core temperature (B10/1)
B1229 Heater core temperature (B10/1)
B1230 Evaporator temperature sensor (B10/6)
2012/3/4(日) 午前 11:53
返信する
B1231 ECT sensor (B11/4)
B1232 Refrigerant pressure sensor (B12)
B1233 Refrigerant temperature sensor (B12/1)
B1234 Sun sensor (B32)
2012/3/4(日) 午前 11:53
返信する
B1235 Emissions sensor (B31)
B1241 Refrigerant Fill
B1246 PTS Parktronic: A42b1 (left outer sensor, front bumper) The plug connection has poor contact or is loose, or the sensor or cable is faulty
B1310 Left/Window airbag sensor is defective
2012/3/4(日) 午前 11:53
返信する
B1315 Problem in Front passenger child seat recognition (could also be memory card on front passenger seat)
B1416 Coolant circulation pump (M13)
B1417 Duovalve (Y21y1), left
B1418 Duovalve (Y21y2), right
B1419 Electromagnetic clutch (A9k1)
B1420 Idle speed increase
2012/3/4(日) 午前 11:54
返信する
B1421 Pulse module (N05)
B1422 Series interface (K1) connection to instrument cluster (A1)
B1423 Switchover valve block (Y11)
B1424 Activated charcoal filler actuator (A32m2) open
B1425 Activated charcoal filler actuator (A32m2) closed
B1432 Non-USA DTC
B1459 Series interface (K2) connection to instrument cluster (A1)
B1462 Wide open throttle (WOT) position signal diesel engines
2012/3/4(日) 午前 11:55
返信する
B1470 Fuel level sensor has on open
B1476 Airbag malfunction indicator and warning lamp is defective
B1481 HRA: Part E2m1 (Right headlamp range adjustment motor) has short to ground
B1489 HRA: Part E2m1 (Right headlamp range adjustment motor) has open or short to positive
B1492 HRA: Part E1m1 (Left headlamp range adjustement motor) has short to positive
B1617 Part E19/1 (Left license plate lamp) is defective
2012/3/4(日) 午前 11:56
返信する
B1618 Part E19/2 (Right license plate lamp) is defective
B1628 Part E2e5 (Turn signal lamp) in module E2 (Right front headlamp unit) is defective.
B1703 Intermittant No Start in AAM Immobiliser Module
2012/3/4(日) 午前 11:56
返信する
B1709 Component H3 alarm siren - not fitted or not coded
B1711 Alarm activated via hood switch S62
B1725 Alarm activated via ATA towing sensor in PSE)
B1729 PSE Pneumatic system doorlock Control Module A37
B1736 Navigation system's CD Player: Check General CD, Check CD data block, Flimsy CD data
B1768 Faulty open data flap limit switch (0025) Front flap
2012/3/4(日) 午前 11:57
返信する
B1773 HRA: Zero position programming has not yet been carried out or is not possible
B1795 Fault in CAN communication with EIS control module
B1850 Electric seat adjustment front right: CAN communication interrupted with DCM
B1858 Two-way radio signal. The progammed code is ok, but the programmable code is not synchronised.
B1863 Belt pretensioner driver's side resistance too high (stored in airbag ECU)
B1864 Belt pretensioner passenger's side resistance too high
2012/3/4(日) 午前 11:57
返信する
B1867 Ignition circuit with component R12/9 (left front side airbag ignition squib) has < Ohm
B1869 left rear side airbag ignition squib has < Ohms
B1871 right front side airbag ignition squib has < Ohms
B1873 right rear side airbag ignition squib has < Ohms
2012/3/4(日) 午前 11:58
返信する
B1980 Fault at interface between trip computer and magnetic compass
B2708 ?
http://www.benzworld.org/forums/w208-clk-class/1474777-we-need-permanent-sticky-error-codes.html
2012/3/4(日) 午前 11:59
返信する
Side Airbag squib connector broken - can't reset SRS light ...
www.bimmerfest.com/.../showthread.php... - キャッシュ - このページを訳す
23 Feb 2011 – Do-It-Yourself H.Q.. Share your DIY projects or ask questions about how to fix something on your own. Help fellow Bimmerfest members improve your wrench turning skills! All BMW DIY tips, tales, and projects discussed ...
2012/3/4(日) 午後 0:38
返信する
PDF]
SRS AIRBAG
www.turbosupras.com/pdfs/.../RS.pdf - このページを訳す
ファイルタイプ: PDF/Adobe Acrobat - クイック ビュー
The inflater and bag of the SRS are stored in the front passen- ger airbag assembly and cannot be disassembled. The inflater contains a squib, igniter charge and gas generant, etc., and in- flates the bag when instructed by the airbag sensor ...
2012/3/4(日) 午後 0:39
返信する
96 E300 Drivers seat belt squib SRS light - MBWorld.org Forums
mbworld.org/.../373114-96-e300-drivers... - キャッシュ - このページを訳す
投稿 2 件 - 2 人の編集者 - 2010年10月27日
I was rear ended and none of the airbags deployed. However I have my SRS light on. An Indy checked the code and said it was the drivers seat belt.
2012/3/4(日) 午後 0:39
返信する
mercedes ml 320 with SRS light on Squib R12/10 and they tell ...
www.justanswer.com/.../39bm1-mercede... - キャッシュ - このページを訳す
hello was there some recent repairs made to right front door lately, they are telling you that the right side door air bag it self is bad, or is the connector is the door bad?? is this a MB dealer that is telling you this?? some after market scan tools ...
2012/3/4(日) 午後 0:40
返信する
SRS Airbags - Ascunce Enterprises
airbagcenter.com/airbag_t... -
アメリカ合衆国 - キャッシュ - このページを訳す
Learn to speak and understand the terms and terminogy of srs airbag replacement parts. ... SRS stands for supplemental restraint system. Airbags are ... The squib is the component within the air bag inflator that begins the deployment process.
2012/3/4(日) 午後 0:41
返信する
SRS Light “ON” – DTC BO111BO116 Open Side Squib Circuit ...
www.ownerservicemanual.com/300-srs-l... - キャッシュ - このページを訳す
There are many information such as side airbag, harness, seatback lock assembly, armrest, seat side, light, and airbag assembly are described inside this …
2012/3/4(日) 午後 0:43
返信する
Code No.B1401: Driver's Air Bag Module (1st Squib) System Fault 2 ...
grandis.2de.ru/.../M152401590021500E... - キャッシュ - このページを訳す
Open circuit in the driver's air bag module (squib) or harness. Open circuit in the clock spring. Malfunction of connector contact. However, if no diagnosis code reset, the SRS warning lamp will be switched off (diagnosis code will be retained) .
2012/3/4(日) 午後 0:45
返信する
PDF]
DTC B1801 OPEN IN D SQUIB CIRCUIT
www.hybrids.ru/priusnhw20/rm/.../m_05_1244.pd... - このページを訳す
ファイルタイプ: PDF/Adobe Acrobat
The D squib circuit consists of the airbag ECU assy, the spiral cable sub-assy and the horn button assy. The circuit instructs the SRS to deploy when deployment conditions are met. DTC B1801 is recorded when an open circuit is detected in ...
2012/3/4(日) 午後 0:45
返信する
i-SCAN2
Fault 1/1 ID:9863
B1863 [ Current / History ]
No description
現在DTC ／ 過去歴DTC
記述なし：
http://blog.jinguji.com/article/232975416.html
Jin氏によると、
i-SCAN2のデータに関連項目がある。それを追記しおきたい。
2012/3/4(日) 午後 1:01
返信する